Finding a Site in the List
"Protected Areas" in a Nutshell
"Protected Areas" are stream reaches where the Pacific Northwest Electric Power and Conservation Planning Council (renamed the Northwest Power and Conservation Council in July 2003 and referred to here as "the Council") determined that hydroelectric development would have unacceptable risks of irreversible loss to fish and wildlife. In essence, Protected Areas are places where fish and wildlife values are judged to outweigh the value of electricity those areas could generate. The Protected Areas list was completed in 1988; changes to the list were promulgated in 1989, 1990, and 1992. The Protected Areas protections have continued as a part of the Council's Fish and Wildlife Program dealing with future hydroelectric development.
Under the Northwest Power Act and the Federal Power Act, federal entities — specifically the Bonneville Power Administration, Federal Energy Regulatory Commission, U.S. Army Corps of Engineers, and the Bureau of Reclamation — must consider Protected Area status and restrictions when making decisions regarding hydroelectric facility permits and access to electricity from those facilities. Inclusion in a "Protected Area" does not prohibit hydroelectric development at a site. However, the Council 1) calls on FERC not to license a new hydroelectric development in a Protected Area, and 2) calls on BPA not to acquire the power from such a project should one be licensed by FERC, nor to allow access to the Pacific Northwest-Pacific Southwest Intertie (the "power grid") in a way that would undermine the protected areas policy.
The Protected Areas protections apply to the creation of new hydroelectric facilities in places on the Protected Areas list. Significantly, the following are exempted:
- Facilities and impoundments licensed by FERC as of August 10, 1988.
- Relicensing such facilities and impoundments
- Modifications to existing hydroelectric facilities or their impoundments
- Addition of hydroelectric generation to a non-hydroelectric dam or diversion, if the facility existed as of the date Protected Area status was granted
- "Transition projects," for which applications or permits were sought from FERC before August 10, 1988.
Protected Area designations by the Council are not the only constraint on hydroelectric development. Federal designations such as wilderness areas, wild and scenic rivers, and other designations can constrain hydroelectric development, as can state statutes. This Protected Areas list is that developed by the Council, and does not necessarily list all federal and state protections. Here are some other statutes and policies under which hydroelectric development may be limited.
(Note that this web page contains a summary of information and does not provide definitive information other than the list of stream reaches which were granted Protected Areas status by the Council, and the protected resources for each of these reaches. The "Links to Documentation" section below can help you find definitive legal information. Also, you can visit the Council's Protected Areas web page for further information.)
Additional Background and Documentation
Beginning in 1983, the Council directed extensive studies of existing habitat and analyzed alternative means of protection. In 1988, the Council concluded that:
- the studies had identified fish and wildlife resources of critical importance to the region;
- mitigation techniques cannot assure that all adverse impacts of hydroelectric development on these fish and wildlife populations will be mitigated;
- even small hydroelectric projects may have unacceptable individual and cumulative impacts on these resources; and
- protecting these resources and habitats from hydroelectric development is consistent with an adequate, efficient, economical, and reliable power supply.
The Council, relying on these studies, designated certain river reaches in the basin as "protected areas," where the Council believes hydroelectric development would have unacceptable risks of loss to fish and wildlife species of concern, their productive capacity, or their habitat. River reaches to be protected are those reaches or portions of reaches listed on the "Protected Areas List" adopted by the Council on August 10, 1988, and subsequently. For each river reach listed on the Protected Areas List, the fish and wildlife to be protected are those on the list.
We have obtained all relevant documentation for the Protected Areas that are available to us. These documents have been converted to pdf format and can be found here.
Determining if a Site is in the Council's Protected Areas List
Where to Find the Protected Areas List
To determine if a site is in a protected area, use one of the following methods.
- Protected Areas Database
- This database contains the entire list with all updates applied. At this time it is the most reliable list, though not the easiest one to use. The list is in a Microsoft Access database which has been zipped to speed download. Depending on your computer's settings Windows may unzip this for you. If you use an older version of Windows you may need a zip program to unzip the file. You will need Microsoft Access 2000 or later to read the file.
- StreamNet Query System
- The query system lets you find stream reaches using geographic criteria you can select yourself -- such as getting a list of protected areas in a particular 4th-field HUC. This list is nearly complete, but does not yet reflect all the 1989-1992 changes. It is not as easy to use as the mapper, but is easier than the downloadable database. Select specific search criteria on the left to narrow the list before trying to view the list.
- StreamNet Protected Areas Mapper
- The Protected Areas mapper lets you find stream reaches on a map and determine if they are in a protected area. However, some of the stream reaches do not reflect the 1989-1992 changes. Also, approximately 1/6 of the stream reaches in the list do not show up on the mapper (the next section explains why this is so). You can use the mapper as a good first indication, but do not depend on it for definitive Protected Area status.
How to Interpret the Reach Codes to Determine Real-World Stream Reaches
Using one of the above three methods will give you a reach code and a reach description. However, knowing for sure what is being referred to is sometimes tricky. By using the mapper method you can see the stream reaches (when available) on a map, and thus know which stream reach is meant. When using one of the other two methods there are two ways to determine the specific location referred to. In instances when the reach description is not ambiguous, the simple text description of the reach is sufficient. For example, "Hood R from Odell Cr to Ditch Cr" is clear and unambiguous, as there is only one Hood River in the Pacific Northwest, and the names of the Hood River tributaries defining the reach are clear and can be found on maps. In other instances, though, streams or their tributaries may have commonplace names — "Mill Creek" or "Rock Creek" for example — or may be unnamed. To determine with certainty the stream reaches referred to in these instances, it is necessary to use the reach code and refer to the mapping system used for producing the Protected Areas list.
At the time the Protected Areas list was created, the state-of-the-art stream mapping system was the U.S. Environmental Protection Agency's "River Reach Number" system, which was based on 1:250,000 scale topographic maps. That system defined stream reaches only for streams appearing on the 1:250,000 scale maps; smaller streams were not included. Reaches were defined from the mouth of each stream to its first tributary shown on the 1:250,000 scale topographic map, from the first tributary shown to the second shown, etc., until reaching the headwaters. A numeric code was created to represent each reach. Thus a single stream may be represented by a single reach code, or by multiple reach codes. Unfortunately, many streams in the Protected Areas list are too small to appear on the 1:250,000 scale topographic maps. For this reason, the original EPA River Reach File maps were modified by drawing in streams by hand and creating new reach codes, by splitting original reaches, and by modifying or deleting reaches that were found to be in error. These modified River Reach File Hydrologic Segment Plots define the reach codes used for nearly all the Protected Areas. To determine with certainty the stream reach a code is meant to represent, you must refer to these modified River Reach File Hydrologic Segment Plots.
There are 19 exceptions from the Cowlitz River drainage and one exception from the Skyomish River drainage that do not use the modified River Reach File codes to indicate reach location. The reach codes listed for these exceptions begin with "LLID". The 13-digit number following "LLID" is the stream code currently used by StreamNet to represent a stream. (These codes refer to entire streams, not just to stream reaches as the EPA system does.) These 20 streams are currently listed only in the downloadable database and cannot be found via the query system or the mapper.
Understanding the location coding used for Protected Areas is not simple, and has not been fully explained here. If you need help, please contact us via email at firstname.lastname@example.org or call us at 503-595-3100.
Links to Documentation
We have gathered all the documentation available to us and created pdf files for download. The entire list of documents specific to the Protected Areas list is organized as shown below.